/

How to Fix Peeled White Thermofoil Kitchen cabinets – Complete Guide

7 mins read
White Kitchen cabinets
White Kitchen Cabinets

Thermofoil cupboards feature a plastic vinyl coating fused to an MDF core like commonly used laminate cabinets. The white thermofoil KItchen cabinets are considered a pocket-friendly alternative to traditional wood cabinets because they can imitate the impression of wood at an inferior price. Nevertheless, the thin layer of PVC material utilized in thermofoil cabinets increases the possibility of vulnerability to peeling, like every other laminated wood product.

There is a high chance of most laminates and surfaces starting to peel after a few years of installation. This happens due to its thinner surface as compared to wood veneers and other plastic laminates. This is why these cabinets are not long-lasting and start to peel more quickly. But you no longer need to fret. This extensive guide aims to provide you with the bases that result in peeling and the ways to resurrect them to their original form.

Reasons for White Thermofoil Kitchen Cabinets Peeling

Some of the most common reasons that result in the peeling of White Thermofoil Kitchen cabinets are.

Frequent Contact with Water

One of the leading reasons is the frequent contact of white thermofoil kitchen cabinets with water. Cabinets placed in places with high dampness exposure like underneath sinks or showers are inclined to peel. This is because moisture penetrates under the thermofoil surface which ultimately leads to swelling and distortion of the base material. Therefore, the cabinets start peeling or showing bubbles.

Traffic on Cabinets

Another reason for peeling is the recurring opening and closing of cabinets. This can result in making fragile spots which potentially cause cabinets to peel from the base material. Adding more to it, slamming cupboard doors and drawer facades can hasten thermofoil exfoliation because the repeated pressure weakens the adhesive. You can prevent premature peeling of thermofoil by using self-closing hinges and drawer grooves.

Heat-generating Appliances

Similar to water vulnerability, constant contact with heat sources can result in bubbling and delaminating the thermofoil. You must make sure your cabinets are not placed near apparatuses like ovens, stoves, coffee makers, or toasters. This is because they are more likely to peel quicker than those set in a distant place. Furthermore, warmth from hair styling machines, such as straighteners, curling irons, and blow dryers can also induce thermofoil to delaminate.

How to Fix Peeled Kitchen Cabinets

In case your cabinets have started showing signs of peeling, you should consider doing the following things.

Evaluate the Damage

Carefully analyze the delamination to decide if it is localized, impacting a tiny area, or across the board, influencing a gigantic part of the texture. Skim the signs like bubbling, peeling boundaries, or areas where the thermofoil has entirely separated from the surface. This investigation will assist you choose the best technique for restoration or replacement.

Gather Supplies

When it comes to repairing peeling cabinets, you require a wide array of equipment, such as a heat gun, cement fine-grit sandpaper, a putty knife, a paintbrush, and matching thermofoil or paint. Here are their uses.

Heat Gun: Used for softening the adhesive

Putty Knife: Remove the peeling material

Contact Cement: Reattach it

Fine-Grit Sandpaper: Smooth the process

Paintbrush: Used for application

Matching Thermofoil or Paint: Necessary to give a finishing touch

Removing the Peeling Thermofoil

To remove the peeling thermofoil, first warm the boundaries of the delamination thermofoil with the help of a heat gun. It will help in making the adhesive soft, which would make it uncomplicated for you to lift. Then, lift the warmed thermofoil carefully with the help of a putty knife, starting from the borders and operating inward. Be careful during the process to avoid any damage.

Clean the Surface

Wash the cabinet surface with a mild detergent and water to clear any gluey remains or grime left behind. Ensure the surface is thoroughly parched before proceeding with the restoration process.

Repair the Surface

In case the underlying surface is impaired, you can restore it to its initial form by using wood filler. Apply the filler and let it dry completely. Once it is done, sand the spot seamlessly to ensure a consistent surface for the new thermofoil or paint.

Apply New Thermofoil or Paint

When applying a new thermofoil, cut it to size and spread it with the help of contact cement. It will help the thermofoil to stick to the cabinet surface perfectly. Conversely, if you want to paint, apply a primer first and then apply paint to get a consistent and flawless finishing look.

Reattach the Hardware

After finishing the repair and assuring the surface is parched, reattach the white thermofoil cabinet doors with the help of a screwdriver or drill. Ensure the hardware is perfectly attached to avert any problems with the fixed area in the future.

Final Touches

Take a thorough look to confirm if there are any flaws or inconsistencies in the finish on the mended area. Make any required touch-ups with the help of matching thermofoil or paint to guarantee a seamless impression. This final review assures that the fixed cabinets are alluring just like the fresh ones.

Final Thought!

To sum up, fixing peeled white thermofoil cabinets demands meticulous concentration in detail and the proper tools. By carefully evaluating the extent of the wear, employing suitable equipment, and following the correct steps, you can rejuvenate your cabinets to their earliest shape. However, routine maintenance can assist extend the life of your thermofoil cabinets.

Adele Smith

I'm Adele Smith. I'm enthusiastic Writer at HomeFacet.com

Leave a Reply

Your email address will not be published.